

42V2A Lithium Battery Charger with Plastic Shell
1、Universal AC Input Voltage:90VAC~264VAC;
2、High efficiency,Maximum efficiency can be 90% above;
3、Protections:Short circuit/Overload/Over Voltage/Under Voltage/Over Current/Over Temperature/Reverse Polarity/Automatic shutdown/Timing/Discharging
4、Fully enclosed plastic case fanless Design,Cooling by free air convection, high reliability;
5、With MCU intelligent control.
6、All materials are environmentally friendly, fire-resistant,lead free;
7、ALL chargers are full load burn-in for 4 hours above with data record;
8、Safety withstand voltage testing: Plastic case charger: input to output 3750VAC(<5mA); Metal shell: input to GND:1800VAC(<5mA);Charger ARC level:Level 5;Transformer primary to secondary:3750VAC(5mA);Transformer ARC level:level 7
9、Low surge current,no interference,low output voltage ripple;
10、No spark DC plug design when plug in or pull out from the battery;
11、Compatible for with or without voltage battery charging input port;
12、No spark short circuit protection.
Casing material: ABS+PC
Weight: almost 0.47kg
Dimension:164*73*45mm
Cable diameter: 1000±100mm (3c certification)
Cable diameter:0.5mm²
Voltage Resistance: 3750VAC
Leakage Current: <3.5mA
Insulation Resistance:50MOhms
Note: The AC plug we will depend on your country, and DC plug you could choose the 5.5*2.1DC or XLR 3-pins male
If you need other parameter of this charger, and have bulk order, pls contact us to customize.
42V2A Lithium Battery Charger with Plastic Shell